| The Original Synthetic Oil |
| All Service Oil sales@allserviceoil.com |
 | |  | |  | |  | |  | |  | |  | |  | |  |
 | |  | |  | |  | |  | |  | |  | |  |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 | |  | |  | |  |
| Copyright 2008 All Service Oil All Rights Reserved |
 | |  | |  | |  | |  |
| SIROCCO™ Synthetic Compressor Oil (SEI) |
SIROCCO™ Synthetic Compressor Oil
ISO 32/46 (SEI)
AMSOIL SIROCCO® Synthetic Compressor Oil (SEI) is
recommended as a direct replacement for PAG compressor
oils such as Sullair Sullube 32® and Ingersoll-Rand SSR
Ultra-coolant®. Not recommended for use with Silicone
base fluids.
ISO 32/46 (SEI)
AMSOIL SIROCCO® Synthetic Compressor Oil (SEI) is
recommended as a direct replacement for PAG compressor
oils such as Sullair Sullube 32® and Ingersoll-Rand SSR
Ultra-coolant®. Not recommended for use with Silicone
base fluids.
Package sizes include:
5-Gallon Pail
55-Gallon Drum
5-Gallon Pail
55-Gallon Drum
Compressor Oil Cross-Reference Guide (68k pdf)
PRODUCT DESCRIPTION
AMSOIL SIROCCO® Synthetic Compressor Oil (SEI) is formulated with premium synthetic ester
technology. This high-quality, long-life fluid lasts several times longer in use than mineral-based
oils. AMSOIL SIROCCO® Compressor Oil is fully formulated with nondetergent additives and is
designed for use in rotary screw compressors and vacuum pumps. SIROCCO® effectively protects
against wear, oxidation, foam and rust and has inherent lubricity and good thermal conductivity
which allow it to reduce heat and energy consumption. AMSOIL SIROCCO® Compressor Oil
increases operating efficiency, reducing money spent on energy, repair and maintenance costs.
AMSOIL SIROCCO® Synthetic Compressor Oil maintains performance across a wide operating
temperature range. Its low pour point, high viscosity index and lack of paraffins (wax) makes it an
excellent all season lubricant. At high temperatures, SIROCCO® forms virtually no carbon, allowing
for clean operation. At cold temperatures, equipment starts easier and the lubricant is quickly
pumped to critical components, preventing lubricant starvation and excessive wear. SIROCCO®
Compressor Oil also resists water to prevent damaging oil/water emulsions, allowing for longer
lubricant life and ease of water removal from the sump.
PERFORMANCE FEATURES
• Resists foaming
• Rust and oxidation inhibited
• Readily separates from water
• Recommended for use in rotary screw compressors
• Long-life/extended drain performance.
• Compatible with polyglycol fluids such as Sullair Sullube 32® and Ingersoll-Rand SSR Ultra-
coolant®
• Biodegradable under the CEC-L33-A94 standard safety advantage
AMSOIL SIROCCO® Synthetic Ester Compressor Oil has higher flash, fire and auto ignition points
than competitive petroleum oils. Its resistance to carbon formation and the ashless additive system
minimize the incidence of deposits acting as ignition-promoting hot spots. Although AMSOIL
SIROCCO® Synthetic Compressor Oil increases fire safety, it cannot be considered nonflammable.
APPLICATION RECOMMENDATION
AMSOIL SIROCCO® Synthetic Compressor Oil is a multi-viscosity oil meeting the requirements of
5W-20. It may be used in applications calling for either an ISO-32 or ISO-46 compressor oil or
coolant. It is recommended for use in single and multi-stage rotary screw compressors and vacuum
pumps that call for this viscosity.
When installing AMSOIL SIROCCO® Compressor Oil, it is recommended that the old oil be
thoroughly drained and if warranted, the system cleaned. If a lot of carbon or residue is found on
the internal compressor parts, follow the manufacturer’s recommendations for removal prior to
installing the new oil. AMSOIL SIROCCO® Compressor Oil has a high level of solvency and may
remove deposits left in the system. Check the filters and oil/air separators regularly for the first 500
hours of operation and replace as necessary.
AMSOIL SIROCCO® Compressor Oil is compatible with and recommended as a replacement for
much higher priced polyalkylene glycol (PAG) compressor oils or coolants such as Sullair Sullube
32® and Ingersoll Rand SSR Ultra Coolant®. No flushing is necessary when changing over from
Glycol Coolants to AMSOIL SIROCCO® Compressor Oil. However, draining the system and
changing the filters is recommended.
AMSOIL SIROCCO® Synthetic Compressor Oil is recommended for use up to 8,000+ hours for
most compressor applications. However, this is subject to operating conditions and maintenance
practices. Monitoring by oil analysis every 1,000 hours is recommended.
COMPATIBILITY
AMSOIL SIROCCO® Compressor Oil is compatible with petroleum oils, most synthetic oils*, and
many seals, paints and materials commonly used in compressors. Materials recommended and not
recommended for use with SIROCCO® Compressor Oil are listed below.
*AMSOIL SIROCCO® Compressor Oil is NOT RECOMMENDED as a replacement for or for use with
the silicone-based compressor oil Sullair Sullube 24KT®. AMSOIL SIROCCO® is NOT
RECOMMENDED for use in“Breathing Air or Refrigeration” compressors.
Recommended
Seals – Viton®, High Nitrile Buna N (>36%), Teflon®
Paints – Epoxy, Oil-Resistant Alkyd, Two-Part Urethane
Plastics – Nylon, Delrin®, Celcon®, PBT
Not Recommended
Seals – Neoprene, SBR Rubber, Low Nitrile Buna N
Paints – Acrylic Paint, Lacquer
Plastics – Polystyrene, Polycarbonate Plastic, PVC, ABS
Note: Process gases suitable for use with AMSOIL SIROCCO® Compressor Oil: Nitrogen,
hydrogen, helium, carbon monoxide, carbon dioxide (dry), ethylene, methane, propane, butane,
propylene, butylene, natural gas, benzene, butadiene, furnace (crack gas), hydrogen sulfide (dry),
sulfur hexafluoride, synthetic gas, sulfur dioxide.
AMSOIL PRODUCT WARRANTY
AMSOIL warrants that the use of its lubricants will not cause mechanical damage to any
mechanically sound equipment when AMSOIL products are used in full compliance with the
company’s recommendations. However, the purchaser of these lubricants is responsible for
determining if these specifications are adequate and proper for the intended application. The
AMSOIL warranty is limited to lubricant performance consistent with indicated specifications. No
additional warranty, expressed or implied, can be made.
AMSOIL PRODUCT AVAILABILITY
AMSOIL SIROCCO® Compressor Oil is available in 5-gallon pails, 55-gallon drums, 275-gallon
totes and bulk quantities. For 275-gallon totes, please allow two to four weeks for delivery.
Sullair Sullube 32® and Sullair Sullube 24 KT® are registered trademarks of Sullair Corporation;
Ingersoll-Rand SSR Ultracoolant® is a registered trademark of Ingersoll-Rand Company.
SIROCCO® is a registered trademark of AMSOIL INC. The product code for SIROCCO® is SEI.
AMSOIL SIROCCO® Synthetic Compressor Oil (SEI) is formulated with premium synthetic ester
technology. This high-quality, long-life fluid lasts several times longer in use than mineral-based
oils. AMSOIL SIROCCO® Compressor Oil is fully formulated with nondetergent additives and is
designed for use in rotary screw compressors and vacuum pumps. SIROCCO® effectively protects
against wear, oxidation, foam and rust and has inherent lubricity and good thermal conductivity
which allow it to reduce heat and energy consumption. AMSOIL SIROCCO® Compressor Oil
increases operating efficiency, reducing money spent on energy, repair and maintenance costs.
AMSOIL SIROCCO® Synthetic Compressor Oil maintains performance across a wide operating
temperature range. Its low pour point, high viscosity index and lack of paraffins (wax) makes it an
excellent all season lubricant. At high temperatures, SIROCCO® forms virtually no carbon, allowing
for clean operation. At cold temperatures, equipment starts easier and the lubricant is quickly
pumped to critical components, preventing lubricant starvation and excessive wear. SIROCCO®
Compressor Oil also resists water to prevent damaging oil/water emulsions, allowing for longer
lubricant life and ease of water removal from the sump.
PERFORMANCE FEATURES
• Resists foaming
• Rust and oxidation inhibited
• Readily separates from water
• Recommended for use in rotary screw compressors
• Long-life/extended drain performance.
• Compatible with polyglycol fluids such as Sullair Sullube 32® and Ingersoll-Rand SSR Ultra-
coolant®
• Biodegradable under the CEC-L33-A94 standard safety advantage
AMSOIL SIROCCO® Synthetic Ester Compressor Oil has higher flash, fire and auto ignition points
than competitive petroleum oils. Its resistance to carbon formation and the ashless additive system
minimize the incidence of deposits acting as ignition-promoting hot spots. Although AMSOIL
SIROCCO® Synthetic Compressor Oil increases fire safety, it cannot be considered nonflammable.
APPLICATION RECOMMENDATION
AMSOIL SIROCCO® Synthetic Compressor Oil is a multi-viscosity oil meeting the requirements of
5W-20. It may be used in applications calling for either an ISO-32 or ISO-46 compressor oil or
coolant. It is recommended for use in single and multi-stage rotary screw compressors and vacuum
pumps that call for this viscosity.
When installing AMSOIL SIROCCO® Compressor Oil, it is recommended that the old oil be
thoroughly drained and if warranted, the system cleaned. If a lot of carbon or residue is found on
the internal compressor parts, follow the manufacturer’s recommendations for removal prior to
installing the new oil. AMSOIL SIROCCO® Compressor Oil has a high level of solvency and may
remove deposits left in the system. Check the filters and oil/air separators regularly for the first 500
hours of operation and replace as necessary.
AMSOIL SIROCCO® Compressor Oil is compatible with and recommended as a replacement for
much higher priced polyalkylene glycol (PAG) compressor oils or coolants such as Sullair Sullube
32® and Ingersoll Rand SSR Ultra Coolant®. No flushing is necessary when changing over from
Glycol Coolants to AMSOIL SIROCCO® Compressor Oil. However, draining the system and
changing the filters is recommended.
AMSOIL SIROCCO® Synthetic Compressor Oil is recommended for use up to 8,000+ hours for
most compressor applications. However, this is subject to operating conditions and maintenance
practices. Monitoring by oil analysis every 1,000 hours is recommended.
COMPATIBILITY
AMSOIL SIROCCO® Compressor Oil is compatible with petroleum oils, most synthetic oils*, and
many seals, paints and materials commonly used in compressors. Materials recommended and not
recommended for use with SIROCCO® Compressor Oil are listed below.
*AMSOIL SIROCCO® Compressor Oil is NOT RECOMMENDED as a replacement for or for use with
the silicone-based compressor oil Sullair Sullube 24KT®. AMSOIL SIROCCO® is NOT
RECOMMENDED for use in“Breathing Air or Refrigeration” compressors.
Recommended
Seals – Viton®, High Nitrile Buna N (>36%), Teflon®
Paints – Epoxy, Oil-Resistant Alkyd, Two-Part Urethane
Plastics – Nylon, Delrin®, Celcon®, PBT
Not Recommended
Seals – Neoprene, SBR Rubber, Low Nitrile Buna N
Paints – Acrylic Paint, Lacquer
Plastics – Polystyrene, Polycarbonate Plastic, PVC, ABS
Note: Process gases suitable for use with AMSOIL SIROCCO® Compressor Oil: Nitrogen,
hydrogen, helium, carbon monoxide, carbon dioxide (dry), ethylene, methane, propane, butane,
propylene, butylene, natural gas, benzene, butadiene, furnace (crack gas), hydrogen sulfide (dry),
sulfur hexafluoride, synthetic gas, sulfur dioxide.
AMSOIL PRODUCT WARRANTY
AMSOIL warrants that the use of its lubricants will not cause mechanical damage to any
mechanically sound equipment when AMSOIL products are used in full compliance with the
company’s recommendations. However, the purchaser of these lubricants is responsible for
determining if these specifications are adequate and proper for the intended application. The
AMSOIL warranty is limited to lubricant performance consistent with indicated specifications. No
additional warranty, expressed or implied, can be made.
AMSOIL PRODUCT AVAILABILITY
AMSOIL SIROCCO® Compressor Oil is available in 5-gallon pails, 55-gallon drums, 275-gallon
totes and bulk quantities. For 275-gallon totes, please allow two to four weeks for delivery.
Sullair Sullube 32® and Sullair Sullube 24 KT® are registered trademarks of Sullair Corporation;
Ingersoll-Rand SSR Ultracoolant® is a registered trademark of Ingersoll-Rand Company.
SIROCCO® is a registered trademark of AMSOIL INC. The product code for SIROCCO® is SEI.
|