| The Original Synthetic Oil |
 | |  | |  | |  | |  | |  | |  | |  | |  |
 | |  | |  | |  | |  | |  | |  | |  |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 | |  | |  | |  |
| Copyright 2008 All Service Oil All Rights Reserved |
 | |  | |  | |  | |  |
| All Service Oil 877-ALL-OILS sales@allserviceoil.com |
| AMSOIL Ea By-Pass Oil Filters (EaBP) |
Ea By-Pass Oil Filters (EaBP)
Engineered for Outstanding Oil
Filtration Efficiency
Engineered for Outstanding Oil
Filtration Efficiency
Four EaBP Filter Sizes Include:
EaBP90
EaBP100
EaBP110
EaBP120
EaBP90
EaBP100
EaBP110
EaBP120
PRODUCT DESCRIPTION
AMSOIL Ea By-Pass Oil Filters (EaBP) provide the best possible filtration protection against wear
and oil degradation. Working in conjunction with the engine’s full-flow oil filter, AMSOIL Ea By-Pass
Filters operate by filtering oil on a “partial-flow” basis. They draw approximately 10 percent of the
oil pump’s capacity at any one time and trap the extremely small, wear-causing contaminants that
full-flow filters can’t remove. The AMSOIL Ea By-Pass Filter typically filters all the oil in the system
several times an hour, so the engine continuously receives analytically clean oil.
Higher Efficiency
AMSOIL EaBP Filters have an efficiency of 98.7 percent at two microns. At normal operating RPMs
the EaBP Filter will filter all of the oil in a typical five quart sump in less than 10 minutes.
Superior Construction
The superior construction of AMSOIL EaBP Filters provides better sealing and increased longevity
along with superior corrosion resistance. AMSOIL EaBP Filters have a marine powder coated
exterior; and their zinc-dichromate base plates increase rust protection. EaBP Filters have a nitrile
HNBR gasket and an orange silicone anti-drain valve. The two stage pleated and layered
cellulose/full synthetic media has an efficiency rating of 98.7 percent at two microns.
Longer Lasting
When used in conjunction with AMSOIL motor oil and an AMSOIL EaO or Donaldson Endurance™
filter, the EaBP Filter should be changed every other full-flow filter change up to 60,000 miles.
When used with other brands of motor oil or full-flow filters, the EaBP Filter should be changed
every other full-flow filter change. AMSOIL recommends using oil analysis when extending oil drain
intervals.
Increased Oil Capacity
The increased fluid system capacity and filtration life provides improved oil cooling and ensures
that equipment constantly runs on clean oil. Engine efficiency is increased, providing extended
engine life.
Soot Removal
AMSOIL has designed a new high-efficiency by-pass filter element that is also a soot removal
device. AMSOIL Ea By-Pass Filters use a synthetic/cellulose sandwiched media. The inner layer of
the element is composed of a highly efficient cellulose media covered with a full synthetic media
outer layer. According to ISO 23556 testing, these filters remove 39 percent of soot contaminants
less than one micron. Soot removal efficiency increases approximately 10 to 14 percent when the
EaBP Filter is used in conjunction with a standard full-flow filter.
By-Pass Filtration Benefits
• Dramatically Extended Drain Intervals
• Improved Oil Cooling
• Increased Filtration Capacity and Life
• Increased Fluid System Capacity
• Efficient Small Particle and Soot Removal
• Significantly Extended Engine Life
• Equipment Constantly Runs on Clean Oil
• Increased Engine Efficiency
• Remove Particles Less Than One Micron
AMSOIL By-Pass Filter Replacement Chart
AMSOIL Ea By-Pass Oil Filters (EaBP) provide the best possible filtration protection against wear
and oil degradation. Working in conjunction with the engine’s full-flow oil filter, AMSOIL Ea By-Pass
Filters operate by filtering oil on a “partial-flow” basis. They draw approximately 10 percent of the
oil pump’s capacity at any one time and trap the extremely small, wear-causing contaminants that
full-flow filters can’t remove. The AMSOIL Ea By-Pass Filter typically filters all the oil in the system
several times an hour, so the engine continuously receives analytically clean oil.
Higher Efficiency
AMSOIL EaBP Filters have an efficiency of 98.7 percent at two microns. At normal operating RPMs
the EaBP Filter will filter all of the oil in a typical five quart sump in less than 10 minutes.
Superior Construction
The superior construction of AMSOIL EaBP Filters provides better sealing and increased longevity
along with superior corrosion resistance. AMSOIL EaBP Filters have a marine powder coated
exterior; and their zinc-dichromate base plates increase rust protection. EaBP Filters have a nitrile
HNBR gasket and an orange silicone anti-drain valve. The two stage pleated and layered
cellulose/full synthetic media has an efficiency rating of 98.7 percent at two microns.
Longer Lasting
When used in conjunction with AMSOIL motor oil and an AMSOIL EaO or Donaldson Endurance™
filter, the EaBP Filter should be changed every other full-flow filter change up to 60,000 miles.
When used with other brands of motor oil or full-flow filters, the EaBP Filter should be changed
every other full-flow filter change. AMSOIL recommends using oil analysis when extending oil drain
intervals.
Increased Oil Capacity
The increased fluid system capacity and filtration life provides improved oil cooling and ensures
that equipment constantly runs on clean oil. Engine efficiency is increased, providing extended
engine life.
Soot Removal
AMSOIL has designed a new high-efficiency by-pass filter element that is also a soot removal
device. AMSOIL Ea By-Pass Filters use a synthetic/cellulose sandwiched media. The inner layer of
the element is composed of a highly efficient cellulose media covered with a full synthetic media
outer layer. According to ISO 23556 testing, these filters remove 39 percent of soot contaminants
less than one micron. Soot removal efficiency increases approximately 10 to 14 percent when the
EaBP Filter is used in conjunction with a standard full-flow filter.
By-Pass Filtration Benefits
• Dramatically Extended Drain Intervals
• Improved Oil Cooling
• Increased Filtration Capacity and Life
• Increased Fluid System Capacity
• Efficient Small Particle and Soot Removal
• Significantly Extended Engine Life
• Equipment Constantly Runs on Clean Oil
• Increased Engine Efficiency
• Remove Particles Less Than One Micron
AMSOIL By-Pass Filter Replacement Chart
| Orders may be emailed to sales@allserviceoil.com or faxed to 763.434.9693 or call 763.257.3130 |
| To purchase AMSOIL products at Wholesales prices, click on the Preferred Customer Account or Dealer Account buttons to the left. A Wholesale account can save you between 20-25% off retail prices. |
