The Original Synthetic Oil
|
SAE (20W)-40 Synthetic Natural Gas Engine Oil (ANG)
Formulated to Provide Top Efficiency in Engines Fueled by
Natural Gas
Low Ash, API CC
Package sizes include:
5-Gallon Pail
55-Gallon Drum
PRODUCT DESCRIPTION
AMSOIL Synthetic Natural Gas Engine Oil (ANG) was developed to deliver unsurpassed
performance in natural gas engines calling for an SAE 40, low-ash (<.50%) lubricant.
Performance Without Compromise
AMSOIL Synthetic Natural Gas Engine Oil’s low-ash formulation minimizes combustion chamber
deposit formation, critical in continuous operation applications. AMSOIL ANG also significantly
reduces valve recession, a common problem with other low-ash oils. AMSOIL Synthetic Natural Gas
Engine Oil is thermally stable, allowing it to combat oxidation, oil degradation and internal deposit
formation.
Maintains Viscosity
AMSOIL Natural Gas Engine Oil is a true straight-grade SAE 40 oil, offering maximum protection
against viscosity loss while minimizing internal oil consumption. Field studies have reported up to a
50 percent reduction in internal oil consumption when compared to competitive oils. Due to its
synthetic formulation, AMSOIL Natural Gas Engine Oil does not thicken as readily and qualifies as
a multi-grade SAE 20W-40 oil without the disadvantages that come with the use of viscosity
improvers. This allows the oil to be used over a broader ambient temperature range and in many
cases eliminates the need for a conventional multi-grade product.
Extended Drain Intervals
AMSOIL Natural Gas Engine Oil may be used for extended drain intervals when monitored by an oil
analysis program. Periodic oil analysis should be conducted at the engine manufacturer’s
recommended drain intervals. Change the oil filter at the recommended engine manufacturer’s
drain intervals.
MIXING AMSOIL
AMSOIL Synthetic Natural Gas Engine Oil is compatible with conventional petroleum oils and other
synthetic lubricants; however, mixing AMSOIL Natural Gas Engine Oil with a petroleum oil will
reduce the drain interval of the AMSOIL Natural Gas Engine Oil. Engine oil additives or after-
market products are not recommended for use with AMSOIL Natural Gas Engine Oil.
APPLICATIONS
AMSOIL Synthetic Natural Gas Engine Oil is recommended for use in natural gas fueled engines
requiring low ash engine oils including the following:
• Buda
• Case International
• Caterpillar
• Climax
• Cooper-Bessemer
• Cooper-Enterprise
• Cummins
• Detroit Diesel
• Dresser-Rand
• Fairbanks-Morse
• Hercules
• Ingersol-Rand
• Minneapolis-Moline
• Onan
• Roiline
• Stewart-Stevenson
• Superior
• Wartsaila
• White
• Worthington
Note: AMSOIL Synthetic Natural Gas Engine Oil should not be used in automotive engines that
have been modified to use propane or natural gas.
TYPICAL TECHNICAL PROPERTIES
AMSOIL Synthetic Natural Gas Engine Oil (ANG) revised as of 7/07
|
Kinematic Viscosity @ 100°C, cSt (ASTM D445)
|
14.3
|
Kinematic Viscosity @ 40°C, cSt (ASTM D445)
|
109.1
|
Viscosity Index (ASTM D2270)
|
133
|
Ash Content (ASTM D-874)
|
<0.45%
|
Pour Point °C (°F) (ASTM D97)
|
-39 (-38)
|
Flash Point °C (°F) (ASTM D92)
|
232 (450)
|
Fire Point °C (°F) (ASTM D92)
|
266 (511)
|
Four-Ball Wear Test (ASTM D4172: 40kgf, 150°C, 1800 rpm, 1 hr) Scar diameter, mm
|
0.35
|
Noack Volatility (ASTM D5800) 250°C for 1 hour, % weight loss
|
6.5
|
|
Copyright 2008 All Service Oil All Rights Reserved
|
AMSOIL Synthetic SAE (20W)-40 Natural Gas Engine Oil