| The Original Synthetic Oil |
 | |  | |  | |  | |  | |  | |  | |  | |  |
 | |  | |  | |  | |  | |  | |  | |  |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
 | |  | |  | |  |
| Copyright 2008 All Service Oil All Rights Reserved |
 | |  | |  | |  | |  | |  |
| Fuel Efficient Synthetic Automatic Transmission Fluid |
Package sizes include:
1-Quart Bottle
1-Quart Bottles (case of 12)
2.5-Gallon Bottle
2.5-Gallon Bottles (case of 2)
30-Gallon Drum
55-Gallon Drum
1-Quart Bottle
1-Quart Bottles (case of 12)
2.5-Gallon Bottle
2.5-Gallon Bottles (case of 2)
30-Gallon Drum
55-Gallon Drum
PRODUCT DESCRIPTION
AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid (ATL) is engineered to exceed the
requirements of GM, Ford and Toyota where low-viscosity oil is required. The highly-specialized
properties of this light-bodied fluid provide outstanding performance without compromising
protection, even in severe operating conditions.
Automatic transmissions have become increasingly complex as vehicle manufacturers strive to
improve efficiency while satisfying consumer demands. Smaller, smoother-shifting transmissions
with longer fluid life capabilities and heavier load capacities are now standard. Traditional ATFs,
however, are unable to meet these extreme requirements, and new fluids have emerged with each
new advancement in transmission engineering. AMSOIL, with its original introduction of a synthetic
ATF in 1980, remains the leader in transmission fluid quality. AMSOIL Synthetic Low-Viscosity
Automatic Transmission Fluid is formulated with the highest-quality components to exceed the most
stringent industry standards. The quality and performance of AMSOIL Synthetic ATF is guaranteed.
Fully Fortified
• Anti-wear/extreme-pressure agents—Extend gear life
• Durable friction modifiers—Anti-shudder
• Anti-oxidants—Extend fluid life
• Seal conditioners—Reduce leaks
• Detergents and dispersants—Keep clean and control deposits
• Corrosion inhibitors—Control rust
• Anti-foam agents—Improve hydraulic function
EXCEPTIONAL HOT- AND COLD-TEMPERATURE PERFORMANCE
Thermal Stability – Hot temperatures are no excuse for poor reliability. Naturally heat-resistant and
heavily fortified with anti-oxidants, AMSOIL Low- Viscosity Automatic Transmission Fluid exceeds
the most demanding oxidation requirements. It delivers outstanding protection against sludge and
varnish deposits that clog narrow oil passages and contribute to clutch glazing. AMSOIL Low-
Viscosity ATF protects hot-running transmissions.
Cold-Temperature Fluidity – Cold, thick automatic transmission fluid lengthens shift times and
reduces energy efficiency (fuel economy). AMSOIL Synthetic Low-Viscosity ATF is wax-free and
delivers extraordinary cold-flow per formance (<-60°F pour point). It helps improve shifting
response and energy efficiency while reducing warm-up times.
OUTSTANDING WEAR PROTECTION
Varying speeds and loads causes torque multiplication and extreme stress on gears and bearings.
To prevent wear damage resulting from insufficient fluid film, AMSOIL Synthetic Low-Viscosity ATF
is formulated with high film strength (shear stability) and a select anti-wear/extreme-pressure
additive that develops a boundary layer of protection between metal surfaces. Even though
AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid is a low-viscosity, fuel-efficient fluid,
it has demonstrated its ability to protect as well as or better than higher-viscosity fluids in the most
severe industry tests.
FRICTION DURABILITY
Today’s transmissions are smaller and must withstand higher horsepower and torque while
delivering smoother shifts, all with longer fluid life recommendations. AMSOIL Synthetic ATF is
formulated with friction modifier additives that deliver outstanding clutch-holding capacity (static
friction), torque-transfer ability (dynamic friction) and anti-shudder properties (slipping
torqueconverter clutches).
EXTENDS FLUID SERVICE LIFE
Modern transmissions are smaller in design, yet are called upon to deliver smoother shifts and
longer fluid-life capabilities in higher-horsepower and higher-torque conditions. AMSOIL placed
great emphasis
on developing a fluid to effectively address the complex demands related to friction. AMSOIL
Synthetic Low-Viscosity Automatic Transmission Fluid delivers outstanding clutch-holding capacity
(static friction), torque transfer ability (dynamic friction) and anti-shudder properties (slipping
torque-converter clutches).
APPLICATIONS
AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid is recommended for automatic
transmissions and other applications requiring DEXRON® VI, MERCON® LV, SP or Toyota WS.
AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid is backward compatible and
replaces DEXRON® III fluids in older GM automatic transmissions. (DEXRON® VI specification
supersedes the obsolete DEXRON® III in GM vehicles.)
*Not for use with CVT or Ford Type F applications.
EXTENDED FLUID SERVICE LIFE
Most drivers are unaware that transmissions commonly operate under severe service and require
shorter fluid drain intervals. AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid is a
long-life fluid capable of extended service intervals. It provides an extra margin of protection,
especially when fluid change intervals are missed or during heavy use; even during abuse. Drivers
can count on AMSOIL Low-Viscosity ATF to provide protection beyond conventional fluids.
AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid (ATL) is engineered to exceed the
requirements of GM, Ford and Toyota where low-viscosity oil is required. The highly-specialized
properties of this light-bodied fluid provide outstanding performance without compromising
protection, even in severe operating conditions.
Automatic transmissions have become increasingly complex as vehicle manufacturers strive to
improve efficiency while satisfying consumer demands. Smaller, smoother-shifting transmissions
with longer fluid life capabilities and heavier load capacities are now standard. Traditional ATFs,
however, are unable to meet these extreme requirements, and new fluids have emerged with each
new advancement in transmission engineering. AMSOIL, with its original introduction of a synthetic
ATF in 1980, remains the leader in transmission fluid quality. AMSOIL Synthetic Low-Viscosity
Automatic Transmission Fluid is formulated with the highest-quality components to exceed the most
stringent industry standards. The quality and performance of AMSOIL Synthetic ATF is guaranteed.
Fully Fortified
• Anti-wear/extreme-pressure agents—Extend gear life
• Durable friction modifiers—Anti-shudder
• Anti-oxidants—Extend fluid life
• Seal conditioners—Reduce leaks
• Detergents and dispersants—Keep clean and control deposits
• Corrosion inhibitors—Control rust
• Anti-foam agents—Improve hydraulic function
EXCEPTIONAL HOT- AND COLD-TEMPERATURE PERFORMANCE
Thermal Stability – Hot temperatures are no excuse for poor reliability. Naturally heat-resistant and
heavily fortified with anti-oxidants, AMSOIL Low- Viscosity Automatic Transmission Fluid exceeds
the most demanding oxidation requirements. It delivers outstanding protection against sludge and
varnish deposits that clog narrow oil passages and contribute to clutch glazing. AMSOIL Low-
Viscosity ATF protects hot-running transmissions.
Cold-Temperature Fluidity – Cold, thick automatic transmission fluid lengthens shift times and
reduces energy efficiency (fuel economy). AMSOIL Synthetic Low-Viscosity ATF is wax-free and
delivers extraordinary cold-flow per formance (<-60°F pour point). It helps improve shifting
response and energy efficiency while reducing warm-up times.
OUTSTANDING WEAR PROTECTION
Varying speeds and loads causes torque multiplication and extreme stress on gears and bearings.
To prevent wear damage resulting from insufficient fluid film, AMSOIL Synthetic Low-Viscosity ATF
is formulated with high film strength (shear stability) and a select anti-wear/extreme-pressure
additive that develops a boundary layer of protection between metal surfaces. Even though
AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid is a low-viscosity, fuel-efficient fluid,
it has demonstrated its ability to protect as well as or better than higher-viscosity fluids in the most
severe industry tests.
FRICTION DURABILITY
Today’s transmissions are smaller and must withstand higher horsepower and torque while
delivering smoother shifts, all with longer fluid life recommendations. AMSOIL Synthetic ATF is
formulated with friction modifier additives that deliver outstanding clutch-holding capacity (static
friction), torque-transfer ability (dynamic friction) and anti-shudder properties (slipping
torqueconverter clutches).
EXTENDS FLUID SERVICE LIFE
Modern transmissions are smaller in design, yet are called upon to deliver smoother shifts and
longer fluid-life capabilities in higher-horsepower and higher-torque conditions. AMSOIL placed
great emphasis
on developing a fluid to effectively address the complex demands related to friction. AMSOIL
Synthetic Low-Viscosity Automatic Transmission Fluid delivers outstanding clutch-holding capacity
(static friction), torque transfer ability (dynamic friction) and anti-shudder properties (slipping
torque-converter clutches).
APPLICATIONS
AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid is recommended for automatic
transmissions and other applications requiring DEXRON® VI, MERCON® LV, SP or Toyota WS.
AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid is backward compatible and
replaces DEXRON® III fluids in older GM automatic transmissions. (DEXRON® VI specification
supersedes the obsolete DEXRON® III in GM vehicles.)
*Not for use with CVT or Ford Type F applications.
EXTENDED FLUID SERVICE LIFE
Most drivers are unaware that transmissions commonly operate under severe service and require
shorter fluid drain intervals. AMSOIL Synthetic Low-Viscosity Automatic Transmission Fluid is a
long-life fluid capable of extended service intervals. It provides an extra margin of protection,
especially when fluid change intervals are missed or during heavy use; even during abuse. Drivers
can count on AMSOIL Low-Viscosity ATF to provide protection beyond conventional fluids.
SERVICE LIFE
Recommendation for cars and light duty trucks
Specification Normal Service* Severe Service*
DEXRON® VI 100,000 miles (160,000 km) 50,000 miles (80,000 km)
MERCON® LV, SP Follow vehicle manufacturer's recommendations
Toyota WS 100,000 miles (160,000 km) 60,000 miles (96,000 km)
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and
according to the recommendations in the Material Safety Data Sheet (MSDS). MSDS's are available
upon request at 715-392-7101 or on our website. Keep Out of Reach of Children. Don't pollute.
Return used oil to collection centers.
Recommendation for cars and light duty trucks
Specification Normal Service* Severe Service*
DEXRON® VI 100,000 miles (160,000 km) 50,000 miles (80,000 km)
MERCON® LV, SP Follow vehicle manufacturer's recommendations
Toyota WS 100,000 miles (160,000 km) 60,000 miles (96,000 km)
HEALTH & SAFETY
This product is not expected to cause health concerns when used for the intended application and
according to the recommendations in the Material Safety Data Sheet (MSDS). MSDS's are available
upon request at 715-392-7101 or on our website. Keep Out of Reach of Children. Don't pollute.
Return used oil to collection centers.
| TYPICAL TECHNICAL PROPERTIES AMSOIL Synthetic Universal Automatic Transmission Fluid (ATF) |
|
| All Service Oil 877-ALL-OILS sales@allserviceoil.com |
| Orders may be emailed to sales@allserviceoil.com or faxed to 763.434.9693 or call 763.257.3130 |
| AMSOIL Synthetic Low Viscosity Automatic Transmission Fluid (ATL) |
Replaces:
Dexron VI
Mercon LV, SP
Toyota WS
Dexron VI
Mercon LV, SP
Toyota WS
| To purchase AMSOIL products at Wholesales prices, click on the Preferred Customer Account or Dealer Account buttons above. A Wholesale account can save you between 20-25% off retail prices. |