Typical Technical Properties
|
The Original Synthetic Oil
|
AMSOIL Series 2000 Synthetic Racing Grease
|
Series 2000 Synthetic Racing Grease, NLGI #2, GC/LB (GRG)
AMSOIL Series 2000 Synthetic Racing Grease protects wheel
bearings and chassis from the dangerous, damaging heat created
by hot pavement, huge engines and the unceasing friction of
intense speed. It is ideal for all high-temperature/high-speed
applications.
Package sizes include:
14-oz. Cartridge
14-oz. Cartridges (case of 10)
14-oz. Cartridges (case of 40)
35-lb. Lug
120-lb. Keg
Load Capacity
AMSOIL Series 2000 Racing Grease is an extreme-pressure multi-purpose grease formulated for
high-temperature/high-speed applications. It also provides superior protection for low-speed
bearings, a job usually reserved for heavy-duty products. Components get the load bearing
capacity of a heavy-duty grease without sacrificing the high-temperature protection of a
multi-purpose.

Anti-Wear Performance
AMSOIL Series 2000 Racing Grease passes the
Ford Film Strength Endurance Test with a 16
point margin (see graph). Most nonsolid-fortified
racing greases, synthetic or conventional, do not
pass. AMSOIL Series 2000 Racing Grease keeps
greased components in like-new condition.
All-Temperature Protection
AMSOIL Series 2000 Racing Grease pairs a high
Viscosity Index synthetic base oil with a
top-quality lithium complex thickener, known for
its extraordinary performance in temperature
extremes. AMSOIL Series 2000 Racing Grease
offers excellent low-tem-perature pumpability and
high-temperature consistency for dependable
all-temperature protection.
Oxidation Resistance and Inhibition
AMSOIL Series 2000 Racing Grease offers
excellent oxidation resistance and a robust
package of oxidation inhibitors, preventing
grease breakdown and component surface
damage in the high oxidizing conditions
associated with high-temperature operation.
Friction Reduction
Because it effectively reduces friction, AMSOIL Series 2000 Racing Grease maximizes power
through-put and fuel efficiency. The extra power provided by Series 2000 Racing Grease
improves acceleration and top-end speed.
Washout Resistance and Corrosion Inhibition
AMSOIL Series 2000 Racing Grease resists water wash-out and inhibits rust and other forms of
corrosion.
Applications
AMSOIL Series 2000 Synthetic Racing Grease meets the highest performance standards of the
National Lubricating Grease Institute; GC for wheel bearing applications and LB forchassis
applications.
AMSOIL Synthetic Lithium Complex Racing Grease
|
|
|
|
Thickener
|
|
|
NLGI Consistency Grade
|
|
|
NLGI Performance Grade
|
|
|
Penetration (ASTM D-217) 25° C [77° F], 0.1 mm Worked 60 strokes
|
|
|
Dropping Point (ASTM D-566) °C [77° F]
|
|
|
Water Washout (ASTM D-1264) 79° C [175° F] % loss
|
|
|
Oil Separation (ASTM D-1742) 24 hr. @ 25° C [77° F], % loss
|
|
|
Rust Protection (ASTM D-1743)
|
|
|
Timken OK Load Test (ASTM D-2509), lbs.
|
|
|
Fortified with Moly Compound
|
|
|
Four Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm
|
|
|
Compatibility with other greases
|
|
|
Extreme Pressure, Four Ball Method (ASTM D-2596) Load Wear Index, kgf
|
|
|
High Temperature Life (ASTM D-3527) hours
|
|
|
Fretting Wear (ASTM D-4170)* mg
|
|
|
Elastomer Compatibility (ASTM D-4289) Volume Change, % GC
|
|
|
Elastomer Compatibility (ASTM D-4289) Volume Change, % LB
|
|
|
Elastomer compatibility (ASTM D-4289) Hardness Change, durometer-A points, GC
|
|
|
Leakage (ASTM D-4290), G*
|
|
|
Low Temperature Torque (ASTM D-4693) n·m, max @ -40° C [-40° F]
|
|
|
Water Spray Off (ASTM D-4049), % max
|
|
|
* NR: Not Required for NLGI GC or LB labeling
|
|
|
|

Copyright 2008 All Service Oil All Rights Reserved
|