| The Original Synthetic Oil |
 | |  | |  | |  | |  | |  | |  | |  | |  |
 | |  | |  | |  | |  | |  | |  | |  |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
Ea Motorcycle Air Filters (EaAM)
AMSOIL has brought Nanofiber technology to the
motorcycle market. AMSOIL Ea Motorcycle Air Filters
hold 15 times more dust than a wet gauze type filter.
Their nanofiber media removes 5 times more dust than
traditional cellulose filters and 50 times more dust than
wet gauze.
AMSOIL has brought Nanofiber technology to the
motorcycle market. AMSOIL Ea Motorcycle Air Filters
hold 15 times more dust than a wet gauze type filter.
Their nanofiber media removes 5 times more dust than
traditional cellulose filters and 50 times more dust than
wet gauze.
| AMSOIL Ea Motorcycle Air Filters (EaAM) |
Nanofiber Basics
pores per square inch, allowing for higher dirt-holding capacity and lower pressure drop compared
to traditional filter medias. Thinner media fibers produce more uniform pore size distribution,
improving the filter’s overall ability to capture and retain particles.
Air Filtration Basics
with contaminants. There are over 400 tons of suspended dirt and other contaminants in a cubic
mile of air over a typical city. The concentration can be even higher in rural areas where there is
frequent travel on unpaved roads. The dirt and contaminants drawn into an engine from the air
are the leading causes of engine wear.
The function of the air filter is to trap and hold these wear causing contaminants without restricting
air flow. As the filter traps more and more contaminants, air flow becomes restricted, smothering
the engine and diminishing performance. The more wear causing contaminants a filtration media
traps and holds, while still allowing optimum air flow, the better the filtration media.
The nanofiber technology used in AMSOIL Ea Filters surpasses all other technology in efficiency,
capacity and service life. With AMSOIL Ea Air Filters, dust and submicron particles remain on the
surface and are trapped in the nanofibers, preventing particles from lodging in the filter media
depth. This produces higher efficiency and higher capacity, extending engine and filter life and
reducing engine wear.
Ea Motorcycle Air Filters
The filtration media in the Ea Motorcycle Air Filter is pleated and has epoxy-coated wire on the
face and back of the media for additional strength and stiffness. High quality plastisol potting
compounds bond the pleat packs to the plastic or aluminum side plates. The S&S (aftermarket
engine and carburetor manufacturer) style round filters are manufactured with high-quality
plastisol that bonds the media to the wire backing and sealing area.
Superior Filtration
The synthetic nanofiber media featured in AMSOIL Ea Motorcycle Air Filters have sub-micron
diameters and small inter-fiber spaces, resulting in more contaminants being captured on the
surface of the media and lower restriction. Cellulose, wetted gauze and foam filters have larger
spaces between the media that cause contaminants to load in the depth of the filter, resulting in
airflow path plugging, higher restriction and lower capacity.
Cleanable for Long Service Life
AMSOIL Ea Motorcycle Air Filters are cleanable, providing unsurpassed protection and long
service life. AMSOIL Ea Motorcycle Air Filters should be cleaned every year or according to
operating conditions. Operation in extremely dusty or dirty environments may require more
frequent cleaning. Ea Motorcycle Air Filters should be changed every four years.
Cleaning Instructions
AMSOIL Ea Motorcycle Air Filters are cleaned in the same manner as AMSOIL Ea Air Filters for
cars and light trucks: with a vacuum or shop air. To clean with a vacuum, place the filter on a flat
surface and carefully vacuum the filter media on the dirty side where the incoming airflow enters
the filter. To clean with shop air, hold the filter with one hand and carefully blow the filter media at
a 45-degree angle on the clean side of the filter using low-pressure (15 to 20 psi) shop air. Using
too much air pressure will damage the filter media.
Superior Alternative
AMSOIL is producing an initial offering of eight Ea Motorcycle Air Filters manufactured for the most
popular Harley Davidson models from the years 1988 to 2006, including motorcycles equipped
with S&S carburetors and air cleaner housings.
pores per square inch, allowing for higher dirt-holding capacity and lower pressure drop compared
to traditional filter medias. Thinner media fibers produce more uniform pore size distribution,
improving the filter’s overall ability to capture and retain particles.
Air Filtration Basics
with contaminants. There are over 400 tons of suspended dirt and other contaminants in a cubic
mile of air over a typical city. The concentration can be even higher in rural areas where there is
frequent travel on unpaved roads. The dirt and contaminants drawn into an engine from the air
are the leading causes of engine wear.
The function of the air filter is to trap and hold these wear causing contaminants without restricting
air flow. As the filter traps more and more contaminants, air flow becomes restricted, smothering
the engine and diminishing performance. The more wear causing contaminants a filtration media
traps and holds, while still allowing optimum air flow, the better the filtration media.
The nanofiber technology used in AMSOIL Ea Filters surpasses all other technology in efficiency,
capacity and service life. With AMSOIL Ea Air Filters, dust and submicron particles remain on the
surface and are trapped in the nanofibers, preventing particles from lodging in the filter media
depth. This produces higher efficiency and higher capacity, extending engine and filter life and
reducing engine wear.
Ea Motorcycle Air Filters
The filtration media in the Ea Motorcycle Air Filter is pleated and has epoxy-coated wire on the
face and back of the media for additional strength and stiffness. High quality plastisol potting
compounds bond the pleat packs to the plastic or aluminum side plates. The S&S (aftermarket
engine and carburetor manufacturer) style round filters are manufactured with high-quality
plastisol that bonds the media to the wire backing and sealing area.
Superior Filtration
The synthetic nanofiber media featured in AMSOIL Ea Motorcycle Air Filters have sub-micron
diameters and small inter-fiber spaces, resulting in more contaminants being captured on the
surface of the media and lower restriction. Cellulose, wetted gauze and foam filters have larger
spaces between the media that cause contaminants to load in the depth of the filter, resulting in
airflow path plugging, higher restriction and lower capacity.
Cleanable for Long Service Life
AMSOIL Ea Motorcycle Air Filters are cleanable, providing unsurpassed protection and long
service life. AMSOIL Ea Motorcycle Air Filters should be cleaned every year or according to
operating conditions. Operation in extremely dusty or dirty environments may require more
frequent cleaning. Ea Motorcycle Air Filters should be changed every four years.
Cleaning Instructions
AMSOIL Ea Motorcycle Air Filters are cleaned in the same manner as AMSOIL Ea Air Filters for
cars and light trucks: with a vacuum or shop air. To clean with a vacuum, place the filter on a flat
surface and carefully vacuum the filter media on the dirty side where the incoming airflow enters
the filter. To clean with shop air, hold the filter with one hand and carefully blow the filter media at
a 45-degree angle on the clean side of the filter using low-pressure (15 to 20 psi) shop air. Using
too much air pressure will damage the filter media.
Superior Alternative
AMSOIL is producing an initial offering of eight Ea Motorcycle Air Filters manufactured for the most
popular Harley Davidson models from the years 1988 to 2006, including motorcycles equipped
with S&S carburetors and air cleaner housings.
| Copyright 2008 All Service Oil All Rights Reserved |
 | |  | |  | |  |
 | |  | |  | |  | |  | |  | |  |
| All Service Oil 877-ALL-OILS sales@allserviceoil.com |
| Orders may be emailed to sales@allserviceoil.com or faxed to 763.434.9693 or call 763.257.3130 |
| To purchase AMSOIL products at Wholesales prices, click on the Preferred Customer Account or Dealer Account buttons above. A Wholesale account can save you between 20-25% off retail prices. |